[Community-Discuss] NAT64

[Adam Nelson]

Arbogast,

I think you'll get better answers on Afrinog or Eanog ... and I'm just a
server guy :-)

But anyway, it seems like IOS 15.4 supports NAT64:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat64-stateless.html

No need to use XE or CGSE.

But I could be totally wrong.

-Adam

--
About Adam: www.linkedin.com/in/adamcnelson

On Fri, May 13, 2016 at 12:52 AM, arbogast fabian <arbogast.fabian at aku.edu>
wrote:

> Folks…
>
> We are looking into way we can gradually deploy IPv6 in our network…
>
> Already we have it running and we have one Test Machine……. The challenge
> we are facing is that from that machine with IPv6 and from other Machines
> with IPv4 we can’t communicate in either direction..
>
> IPv6 Machine just communicate with IPv6 only machines like wise IPv4
> Machines just communicate with IPv4 machines ….
>
> A work around is to do NAT64 between the two subnets….
>
> It seems the hardware (Cisco 2921 router with IOS Version 15.0) can’t do
> NAT64……..
>
> From the internet it seems NAT64 runs on IOS-XE and IOS-CGSE which are
> Hardware dependent……..seems that we can’t upgrade IOS Version 15.0 to any
> the two which supports NAT64.
>
> Before committing any expenses to acquire new router we want to reach out
> to the community for comments and advises….
>
> Pls. review and advise.
>
> Thank you…
>
>
> --
>
> Arbogast Fabian,
> IT Manager,
> Aga Khan Development Network,
> Aga Khan University - Tanzania
> 10 Urambo Street – Upanga,
> P.o Box 125,
> 11102 Dar Es Salaam.
> Tel:+255-22-2150051
> Fax:+255-2150875
> Cell:+255-78-447-8387
>
> _______________________________________________
> Community-Discuss mailing list
> Community-Discuss at afrinic.net
> https://lists.afrinic.net/mailman/listinfo/community-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.afrinic.net/pipermail/community-discuss/attachments/20160513/2ccea5c8/attachment.html>