[AfrIPv6-Discuss] NAT64 for Dual Stacking!

[Fabian Jr]

NAT64 is one way of gradually deploy IPv6 alongside with the traditional IPv4 

at least as per Cisco work arounds...
 

 

Arbogast Fabian,

cell:+255-78-447-8387


> Date: Fri, 13 May 2016 10:02:28 +0400
> From: daniel at afrinic.net
> To: afripv6-discuss at afrinic.net
> Subject: Re: [AfrIPv6-Discuss] NAT64 for Dual Stacking!
> 
> On Fri, May 13, 2016 at 08:05:44AM +0300, Fabian Jr wrote:
> > Hi Mussa,
> > 
> > thanks for your quick responce on this...
> > 
> > im not sure if my upstream providers are dual Stacked... i will check with them..
> 
> If not, you can tunnel out. This is not ideal and does have some
> downsides, but it's workable as a transition phase.
> 
> > 
> > we have two links talking via BGP.......
> 
> > we also have our own IP subnets both IPv4 and IPv6 ..... so we
> > provider independent on IP resources ... we would love to continue to
> > be independent ..... may be we may need to acquire a new
> > hardware........
> 
> I doubt it. You really want to avoid NAT64 - and so far you have not
> given any good reason you would need it :)
> 
> 
> - Daniel
> 
> 
> _______________________________________________
> AfrIPv6-Discuss mailing list
> AfrIPv6-Discuss at afrinic.net
> https://lists.afrinic.net/mailman/listinfo/afripv6-discuss
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.afrinic.net/pipermail/afripv6-discuss/attachments/20160513/f2b82c3b/attachment.html>